Skip to content

★★★★★ 5.0 on Google · 61+ reviews

TopFlow Gutters

Gutter Guards

Gutter Guards That Put Your Ladder Away for Good

Professionally installed micro-mesh gutter guards that keep out leaves, pine needles, seeds and shingle grit, so your gutters keep flowing through every storm. Installed on new or existing gutters, usually in a single day.

Best for
Homes with trees nearby, tall homes, anyone tired of cleanings
Install time
Usually 1 day
Works on
New or existing gutters in good shape
Roof warranty
Fastened to the gutter, not under shingles

What clogged gutters really cost you

Gutters only work when water can get through them. Once leaves and seeds pack the downspout, every storm overflows the gutter and dumps roof water right where you don’t want it:

  • Against the foundation. Overflow saturates the soil next to your basement walls. Wet basements, efflorescence and cracked slabs follow.
  • Behind the gutter. Standing water rots the fascia board the gutter is screwed into. Then the gutter starts pulling away.
  • Over walkways and steps. In winter that becomes ice.
  • Onto you. Every year homeowners get hurt cleaning gutters from ladders. Two-story homes in Montgomery and Bucks County are 20+ feet at the eaves.

Gutter guards fix the cause: debris never gets into the gutter in the first place.

Gutter guard types compared

Not all gutter guards are equal. Here is an honest comparison of what’s on the market:

Guard typeHow it worksProsConsBest for
Micro-mesh (what we install)Fine stainless mesh on a rigid aluminum frameStops leaves, pine needles, seeds and shingle grit. Handles heavy rain. Long lifeHigher upfront cost than screensAlmost every home, especially near oaks and pines
Perforated aluminum / screenSheet or screen with holesInexpensiveSeeds, needles and grit pass through. Holes clogLight-debris lots on a budget
Reverse-curve / surface tensionWater follows a curved lip into the gutterHides the gutterOvershoots in downpours. Needles and seeds get in. Often installed under shinglesRarely recommended
Foam insertsFoam block fills the gutterCheap DIYHolds debris, grows mold, breaks down in a few seasonsNot recommended
Brush guardsBristles sit in the gutterEasy DIYLeaves tangle in the bristles. Must be pulled out to cleanNot recommended

National brands like LeafFilter and LeafGuard are micro-mesh or one-piece systems sold through in-home sales visits. They work, but you pay heavily for the brand and the sales process. We install a professional-grade micro-mesh system at a local contractor’s price, and the person who quotes your job is the person who stands behind it.

The guard we install

We install a professional-grade micro-mesh system with a fine stainless mesh over a rigid aluminum frame, backed by our 15–25 year warranty coverage. What makes it work:

  • Surgical-grade stainless mesh. Fine enough to stop pine needles and roof grit, open enough to take a summer thunderstorm.
  • Rigid frame. It won’t sag under wet leaves or snow load.
  • Fastened to the gutter, not tucked under your shingles. That protects your roof and your roof warranty.
  • Color-matched to your gutters so it disappears from the street.

Do I need new gutters first?

Guards only work if the gutter underneath is sound. During your free estimate we check:

  1. Pitch. Is water actually flowing toward the downspouts, or sitting in low spots?
  2. Hangers and fascia. Is the gutter tight to solid wood, or pulling off rotted boards?
  3. Seams and corners. Are older sectional gutters leaking at every joint?
  4. Size. Is a 5-inch gutter trying to handle a big roof that needs 6-inch?

If your gutters pass, we add guards to them. If they don’t, we will show you why and quote seamless gutter replacement with guards. Bundling them is almost always cheaper than doing them a year apart.

How a guard install works

  1. Clean and flush. We empty and flush the gutters and downspouts so you start clean.
  2. Tune up. Re-pitch low spots, tighten or add hangers, and seal any suspect corners.
  3. Fit and fasten. Guards are cut to length, notched around corners and fastened to the gutter.
  4. Water test and walkthrough. We run water across the roof edge so you can see it flow, then clean up and walk the job with you.

Gutter guards in your town

We install guards across eastern Montgomery County, lower and central Bucks County, and Northeast Philadelphia. Each town page below covers local trees, housing and the most common gutter problems we see there.

Close-up of stainless micro-mesh gutter guard
Gutter guards installed on a home backing onto woods
Long run of gutter guards along a roof edge
Gutter guard fitted to a seamless gutter

The process

How it works

  1. 01

    Book your free estimate

    Fill out the form or call. We confirm a time by text, usually within the hour during business hours.

  2. 02

    We measure & quote on site

    Mark walks the roofline, checks fascia and downspouts, and gives you a written, itemized quote. No pressure.

  3. 03

    Install in 1–2 days

    Seamless runs are formed on site to the exact length. Guards are fastened to the gutter, not under your shingles.

  4. 04

    Walkthrough & warranty

    We water-test, clean up, walk the job with you, and register your warranty.

Reviews

What homeowners say

5.0

★★★★★

61+ Google reviews

Read our 61+ reviews on Google →

FAQ

Gutter Guards questions

Do gutter guards really work?

Good ones do. A fine stainless micro-mesh guard on a rigid frame keeps leaves, needles and seeds out while letting water through. Cheap screens, foam inserts and brush guards are the ones that give guards a bad name. They clog, collapse or let small debris in.

Will I ever need to clean my gutters again?

Not in the usual sense. Debris stays on top of the mesh, and most of it blows or washes off once dry. On very heavily wooded lots we may recommend a quick visual check or a light brush-off after leaf season, which is far easier than scooping out gutters.

Can you put guards on my existing gutters?

Yes, if your gutters are solid, properly pitched and securely hung. If they are sagging, leaking at seams or pulling off the fascia, we will tell you, because guards on failing gutters are wasted money. In that case replacing gutters and adding guards together is usually the better value.

Will gutter guards void my roof warranty?

The guards we install fasten to the gutter and sit at the roof edge. They do not slide under your shingles or require lifting them, which is what can cause warranty problems with some systems.

Do gutter guards help with ice dams?

Guards keep gutters clear, so meltwater has somewhere to go, which helps. But ice dams start with heat escaping through the roof, so insulation and attic ventilation are the real fix. We will be honest about what guards can and cannot do.

Do guards keep out pine needles?

A fine micro-mesh does. Pine needles slip through screens and between the fins of reverse-curve covers, but they cannot pass through micro-mesh openings.

How much do gutter guards cost?

Cost depends on linear footage, home height, the condition of your gutters, and the number of corners and downspouts. See our gutter guard cost page for current price ranges, or book a free in-home estimate for an exact written price.

How long does installation take?

Most homes are done in one day. If we are replacing gutters at the same time, larger homes may take two.

Ready to stop worrying about your gutters?

Free in-home estimate, written quote, and most installs finished in 1–2 days.

Call Now Free Estimate