Seamless Gutters, Formed On Site to Fit Your Home

Why seamless?

Most gutter leaks start at a seam. Older sectional gutters have a joint every 10 feet, held together with caulk that dries, cracks and lets go. Seamless gutters are formed on site from one continuous coil of aluminum, so a 40-foot run is one piece. Seams only exist where the gutter turns a corner, and those are sealed and riveted.

The result: fewer leaks, a cleaner look from the street, and a gutter that is cut to the exact length of your roofline.

What’s included in a TopFlow seamless install

• Tear-off and haul-away of your old gutters and downspouts.
• Fascia inspection. Rotted or soft boards are replaced so hangers anchor into solid wood.
• Drip edge check. Missing drip edge lets water run behind the gutter, so we flag it and quote it if needed.
• Seamless gutters formed on site in 5” or 6” K-style, color-matched to your trim.
• Hidden hangers spaced for snow load. No spikes punched through the face of the gutter.
• Correct pitch toward each downspout, so water does not sit.
• Downspouts sized and placed to handle your roof, with extensions that carry water away from the foundation.
• Cleanup and walkthrough. We water-test the system and walk it with you.

Sizing: 5-inch vs 6-inch

Roof area, pitch and valleys decide the size, not habit. A steep roof with a valley dumping into one inside corner can overwhelm a 5-inch gutter in a ten-minute summer storm. We measure every roof plane on your estimate and recommend the size that will actually keep up. Often that means 6-inch gutters with 3”×4” downspouts.

Our standard install is 6-inch K-style (“6K”) seamless aluminum, which carries far more water than the 5-inch gutters most homes here were built with.

Add guards while we’re there

Since the crew, ladders and equipment are already on site and the gutters are brand-new and perfectly pitched, adding micro-mesh gutter guards at the same time is the most cost-effective way to get both.

Seamless gutters in your town